OPTICRON IS 60 /45° FIELDSCOPES
Opticron IS models come with
comprehensive 10 year guarantee.
OPTICRON IS 60 /45° EYEPIECE OPTIONS
A wide range
of eyepieces are available for use with Classic Fieldscopes. Choosing the best eyepiece is
often confusing but making the right choice will depend on price and application. It is
important to remember that the eyepiece is an integral part of the whole set-up and opting
for a lower quality lens will make a difference to the overall image quality derived from
NEAR FOCUS ADAPTER
Eyepieces [Note. Eyepiece adapters are required to fit HDF eyepiece to IS bodies.
These are supplied 'Free of Charge' if purchased with a new scope body or priced at £3.00
inc. VAT if purchased separately.
Use 40927S adapter to fit 40862S and 40872S HDF collar thread eyepieces.
Use 40925S adapter to fit all other HDF internal screw thread eyepieces. ]
The preferred choice for quality and viewing comfort, HDF eyepieces have large dia.
eyelenses and provide 'walk-in' field of vision. All eyepieces feature long eyerelief for
full field of view with or without spectacles and fixed magnification models are wide angle.
IS 60 /
HR Eyepieces [Note. Eyepiece adapters
are required to fit HR eyepiece to IS bodies. These are supplied 'Free of Charge'
if purchased with a new scope body or priced at £3.00 inc. VAT
if purchased separately.
Use 40926S adapter to fit 40821S HR zoom collar thread eyepiece. Use 40925S adapter to fit
all other HR internal screw thread eyepieces.]
Good choice as either
supplementary eyepiece in combination with HDF or single eyepiece for the value conscious.
Eyepieces 40813C,40815C offer full field of view with
spectacles but high power models including 40821 zoom do not.
To convert the instrument you will
- 40215S Photoadapter
VAT £ 65.00
Near focus Adapter Price incl. VAT
- Equivalent focal lengths
using the Telephoto adapter are:
585mm/f.11.7 in IS 50
700mm/f.11.7 in IS 60
To connect your camera to the
- Suitable T2 mount
Price incl. VAT
To convert the instrument to a telephoto lens screw the internal thread of 40215I onto
40927S adapter ring. Secondly screw the combination onto the eyepiece end of
the main body. Attach appropriate T mount to external threaded end of Telephoto adapter
and then attach SLR camera body onto T mount.
Note. If you find the camera is at an odd angle when attached - adjust the Telephoto
adapter or twin rings on the T mount to bring the camera into line.
For best results we recommend you use 400 or 800 ASA rated film and a cable release.
Back to Opticron Main List Page